|
05-13-2016, 11:14 PM
|
#1
|
Junior Member
Join Date: May 2016
Location: Oceanside
Posts: 3
|
Adding front stabilizing jacks to X17Z
We're interested in adding front stabilizer jacks to our new X17Z. Does anyone have any experience with this? Any brand names to recommend?
|
|
|
05-14-2016, 07:48 AM
|
#2
|
Senior Member
Join Date: Apr 2010
Location: Minneapolis, MN
Posts: 224
|
My 2010 17Z didn't come with front stabilizers, just the two in the rear. I added 2 BAL stabilizers to the front and it helped a lot. They are bolted into the black frame that runs across the front. I think there are 2 bolts on each. It's not a big project, mainly just measuring and drilling the holes. I bought the stabilizers at the Jayco RV dealer, but you can get them online.
__________________
2010 Jayco 17Z
2007 Jeep Commander Overland 4x4 HEMI
|
|
|
05-15-2016, 01:18 PM
|
#3
|
Member
Join Date: Jun 2014
Location: Lake Winola, PA
Posts: 73
|
i added them to my 16xrb also, got them off ebay. i used self tapping bolts, fairly easy but i had to move the propane line a little to get the one jack to match the other (did other side first, would do side that lines run on first )and the regulator broke when i took the line off so i ended up having to get a new one of those also.
__________________
92 Wrangler
98 Grand Cherokee 5.9 Limited
13 Grand Cherokee
14 SLX 16XRB
|
|
|
05-15-2016, 01:21 PM
|
#4
|
Senior Member
Join Date: Apr 2014
Location: Fort Wayne
Posts: 1,271
|
I bought mine for the center of my tt from harbor freight and they work fine
__________________
2011 F250 King Ranch Crew Cab Diesel , 2015 Jayco Eagle 338 rets
|
|
|
05-15-2016, 01:30 PM
|
#5
|
Senior Member
Join Date: Dec 2014
Location: FL
Posts: 11,281
|
Adding front stabilizing jacks to X17Z
Hello, Kaye. Welcome to the JOF.
__________________
Sherm & Terry w/rescue Eydie (min Schnauzer) & Charley (std Poodle)
SOLD:2015 Jay Flight 27RLS, GY Endurance (E), Days: 102 '15, 90 '16, 80 '17, 161 '18, 365+ '20
SOLD: 2006 Ford F350 PSD, 4WD, CC, LB, SRW, Camper pkg., 375,000mi
Full timing: Some will think you're crazy, some will be envious, just enjoy the freedom!
|
|
|
05-15-2016, 01:30 PM
|
#6
|
Senior Member
Join Date: Apr 2014
Location: Fort Wayne
Posts: 1,271
|
__________________
2011 F250 King Ranch Crew Cab Diesel , 2015 Jayco Eagle 338 rets
|
|
|
05-15-2016, 02:33 PM
|
#7
|
Senior Member
Join Date: Jul 2015
Location: Mid-Mi
Posts: 1,492
|
Quote:
Originally Posted by Paintinfool3
I bought mine for the center of my tt from harbor freight and they work fine
|
I have wondered about the HF ones to do the same. BUT a buddy suggested getting some 30" for the rear, and move the factory 24" to the center for those off level sites. Makes sense, would need less blocks underneath the jacks in extremely uneven sites (front to rear).
Kaye,
BAL (owned two trailers with BAL scissor jacks) and Husky seem to have very good reviews. I would only suggest the scissor jacks as they do seem to be a little more stout then the lighter duty stabilizer jack.
|
|
|
05-15-2016, 08:32 PM
|
#8
|
Senior Member
Join Date: Mar 2016
Location: NW Chicago Burbs
Posts: 103
|
I bought a pair from Harbor Freight a couple of weeks ago and installed them on our 16XRB. No hardware included so I ran to Home Depot and bought the stainless self tapping screws recommended in the instructions.
Tools used:
White paint pen
Center punch
Cordless drill
Cordless impact driver
Clear silicone in the holes and on the threads to hopefully prevent corrosion
Advantage: The nut on the new units are the same as the factory jacks so you can use your factory wrench.
2-1/2 Ton Trailer Stabilizer Jack
Good luck!!!
|
|
|
05-15-2016, 08:40 PM
|
#9
|
Senior Member
Join Date: Mar 2016
Location: NW Chicago Burbs
Posts: 103
|
Quote:
Originally Posted by Paintinfool3
|
Wish I'd seen these before I paid the Harbor Freight price!!!
|
|
|
05-16-2016, 12:27 PM
|
#10
|
Member
Join Date: Jul 2014
Location: Boaz
Posts: 47
|
Until a couple of weeks ago, we just used some of the Camco stacker jacks from Wal Mart. When we took it in to get one of the rear jacks replaced under warranty (screw fell out going down the road), I just had the dealer put two on the front as well. I don't understand why these smaller units don't come with stabs at all four corners, it's not that much of a cost saving, and, the increased stability, decreased bounce is well worth the investment.
David
|
|
|
05-19-2016, 06:34 PM
|
#11
|
Junior Member
Join Date: May 2016
Location: Oceanside
Posts: 3
|
It was a breeze!
Thanks for all the input. DH ordered the BAL from Amazon, they got here in two days and it took him about half an hour! So much more stable!
|
|
|
05-27-2016, 05:22 AM
|
#12
|
Junior Member
Join Date: Oct 2015
Location: Londonderry
Posts: 4
|
I thought about adding front stabilizer jacks to my 17C and decided to simply take along a pair of jack stands that I have in the garage and they work great. I just couldn't justify the expense at this time for the pair of scissor jacks, when I had the extra jack stands around.
Enjoy the summer!
|
|
|
05-27-2016, 06:59 AM
|
#13
|
Junior Member
Join Date: Aug 2015
Location: Rockledge
Posts: 14
|
Quote:
Originally Posted by Kaye
Thanks for all the input. DH ordered the BAL from Amazon, they got here in two days and it took him about half an hour! So much more stable!
|
Which ones did you buy from Amazon?
Sent from my SM-G860P using Tapatalk
__________________
2015 Jay Feather SLX 19XUD (TT)
2008 Chevy Express AWD Van (TV)
|
|
|
06-09-2016, 09:26 PM
|
#14
|
Junior Member
Join Date: May 2016
Location: Oceanside
Posts: 3
|
These:
BAL 24028 LoPro Scissors Jack
Sold by: Amazon.com LLC
$66.48
Trailer frame had pre drilled pilot holes. I just drilled them out to the size on the instruction sheet and they bolted right on.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|