When we tried to leave this am, had everything all packed up, and ready to pull out. So did the final shore power disconnect and now nothing works, no power.
MAGNUM Remote said “dead battery” and would not drive anything. Plugged back into shore power, same thing, nothing. Transfer switch works, but brand new BB GC3 house battery was drained. No breakers tripped, nothing.
Was able to get Mobile Tech out to help. He was able to “jump start” the Magnum Converter/Inverter, with a Battery Booster device ( that i will now order for future use), and are now back in ops with AC on shore power, with the inverter Remote showing that it is charging battery. Strange thing though, FIREFLY G6A is now erratic…it has some lights on, some off and none of the light switch panels work. I disconnected the power to the control panel and let is sit for a bit then reconnected…same thing, some things work DC some things don’t, specifically with the light control panels and lights being on in certain areas.
Have an appointment with NIRV center in the AM, hopefully can figure out what happened, and get it fixed…..
Linear Mode
