Broken Wires

soonerfan1 · 04-09-2018, 04:31 PM

So I was checking the trailer out for the next trip and noticed these wires for one of the brakes broke. Should be an easy fix but wanted to see if anyone knew what kind of spice this is?

WannaGo · 04-09-2018, 06:19 PM

Looks like a weatherproof Scotchlok... (I never used 'em but I believe that's what it is)

I see no reason you couldn't repair with a small wirenut and some tape, or maybe better, a crimp connector, and some heat shrink.

scuba0331 · 04-09-2018, 06:34 PM

Check these connectors out. https://www.posi-products.com

jimp · 04-10-2018, 04:18 AM

The posi-lock items are good stuff. Have used them in cars and boats, but never in a situation being exposed to road debris like that. My new TT has connectors similar to what is shown in your picture.

Jagiven · 04-10-2018, 05:52 AM

It is a scotchlock, by 3M. It is a crimp connection. Put the stripped wire in, and use a large pliers to crimp. Usually they have a like gel inside them to protect the wires from corrosion.

Lolead · 04-10-2018, 07:15 AM

I like to use a crimp connector that after you crimp you take a small tourch, heat the connector, and it melts solder inside the connector and shrinks the outside. Never had one of these type fail.

RVhiker · 04-10-2018, 08:47 AM

Quote:

Originally Posted by Lolead

I like to use a crimp connector that after you crimp you take a small tourch, heat the connector, and it melts solder inside the connector and shrinks the outside. Never had one of these type fail.

Where can I purchase connectors as you describe? Could you post a link?

jimp · 04-10-2018, 06:28 PM

I've seen the crimp ons with shrink tubing, but not with solder either.

Lolead · 04-10-2018, 06:35 PM

I believe we got ours from "Wurth Corp." but I will have to check to be sure. I worked in a commercial collision repair shop for nearly 40 years and that is where I became familiar with them.I will try to check this week and post for sure when I am certain.

lucky1 · 04-10-2018, 07:17 PM

https://www.amazon.com/SOLOOP-Electr.../dp/B018GBBG6G

us71na · 04-10-2018, 08:04 PM

One of the first things I noted on out trailer was the number of wires hanging down where road debris, branches etc could hit them. I spent time moving every wire I could to a safer location.

As far as fixing your broken wires, remember:

1. That the underside of the trailer will get really wet at times while towing.
2. These wires control your brakes so you want a good secure water tight repair. Wire nuts and tape won't do that.
3. Use crimp type wire connectors with waterproof sealing shrink tube.

You may also like: