Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 09-03-2014, 07:43 PM   #1
Junior Member
 
Join Date: May 2010
Location: Southern IL
Posts: 15
freshwater drain valve replacement

The plastic drain valve on my freshwater tank is falling apart. Does anyone know how is it attached to the tank on a 2005 Jayfeather 29Y ?





Click image for larger version

Name:	Freshwater Turn Off pic 1.jpg
Views:	25
Size:	71.9 KB
ID:	15001

Click image for larger version

Name:	Freshwater Turn Off pic 2.jpg
Views:	23
Size:	78.3 KB
ID:	15002
__________________

__________________
2005 Jay Feather 29Y
2000 Toyota Tundra
Liontiger is offline   Reply With Quote
Old 09-03-2014, 08:57 PM   #2
Member
 
Join Date: Mar 2014
Location: Douglassville
Posts: 31
The one on my 2005 23B looks identical to yours. I have ordered a replacement just have not yet installed it. We almost always camp with full hook ups so not a big issue for me.
__________________

__________________
Jamie

2005 Jayco Jay Feather 23B -- current
1999 Chevy Suburban 1500 -- current

2001 Coleman Bayside Elite
2003 GMC Sonoma ZR2 Quad Cab
Jhmlbrgr is offline   Reply With Quote
Old 09-03-2014, 09:14 PM   #3
Junior Member
 
Join Date: May 2010
Location: Southern IL
Posts: 15
Can you tell me the part number ? If I can look it up I might be able to tell if the part screws in or slips into a hose with barb.
__________________
2005 Jay Feather 29Y
2000 Toyota Tundra
Liontiger is offline   Reply With Quote
Old 09-03-2014, 09:33 PM   #4
Member
 
Join Date: Mar 2014
Location: Douglassville
Posts: 31
I can tell you it just pushes into the clear hose. I belive there is a hose clamp on it and that is all. I didn't get a part number just ordered one off of amazon. They are pretty much universal I assumed.
__________________
Jamie

2005 Jayco Jay Feather 23B -- current
1999 Chevy Suburban 1500 -- current

2001 Coleman Bayside Elite
2003 GMC Sonoma ZR2 Quad Cab
Jhmlbrgr is offline   Reply With Quote
Old 09-04-2014, 04:11 AM   #5
Senior Member
 
mcfarmall's Avatar
 
Join Date: Jun 2011
Location: Kalamazoo, West Michigan
Posts: 1,814
Take those screws out and look! There is probably a short piece of tubing under that fancy plastic housing that pushes on a hose barb molded on the backside of the valve.
__________________
2006 23B Hybrid with 10k round bar WDH
2011 F150 4x4 SCREW Ecoboost, Max Tow, Integrated TBC, 3.73 LS axle, Firestone Ride Rite airbags.
mcfarmall is offline   Reply With Quote
Old 09-04-2014, 06:53 AM   #6
Senior Member
 
Join Date: Jan 2011
Location: Vienna
Posts: 1,645
Quote:
Originally Posted by mcfarmall View Post
Take those screws out and look! There is probably a short piece of tubing under that fancy plastic housing that pushes on a hose barb molded on the backside of the valve.
That is the way mine was. Just two screws to hold it in and slide it out. Remove the old valve and slide the new one in. I have replaced those on just about all my units. This Florida Georgia heat just does them in.
__________________

Joe Hinson
2010 Jayco Quest G2(SOLD)
2014 Jayco Eagle 33.5RETS
2007 Ram 2500 5.9L Cummins(SOLD)
2015 Ram 2500 6.7L Cummins 4WD
:)
namusmc65 is offline   Reply With Quote
Old 09-04-2014, 07:35 AM   #7
Senior Member
 
SmokerBill's Avatar
 
Join Date: Sep 2010
Location: PNW
Posts: 2,699
I had to replace the drain valves on my TT. I bought a pair (mine has 2) and took the old ones off. Found out I got the wrong part, because the hose barbs on the new ones were too small. Just saying, different hose sizes are used in different rigs, so I'd remove one and measure the hose ID before getting the new valves.
__________________
Bill
2011 Dodge Ram 1500 HEMI Quad Cab
2011 Jay Flight 26BH
SmokerBill is offline   Reply With Quote
Old 09-04-2014, 10:59 AM   #8
Senior Member
 
Join Date: Aug 2011
Location: Missouri City, The Republic of Texas
Posts: 3,004
This may help.
Camping World
__________________
Cheers,
T_

2013 F-350 CC SB 2WD 6.7PS
2013 Eagle Premier 351 RLTS
-SOLD- 2012 X23B
-SOLD- 2003 Ford Expedition 5.4, Bilstein shocks
RedHorse1 is offline   Reply With Quote
Old 09-05-2014, 09:55 PM   #9
Junior Member
 
Join Date: May 2010
Location: Southern IL
Posts: 15
The 2 "screws" in the pictures were actually rivets. I had to take 4 screws out that were attached to the frame and take the whole thing apart. I cut the rivets off from the inside and pushed the old valve out. The old valve is the barb variety and I will be putting a new valve back in place with screws this time. Thanks for your help and suggestions.
__________________
2005 Jay Feather 29Y
2000 Toyota Tundra
Liontiger is offline   Reply With Quote
Old 08-21-2017, 04:26 PM   #10
Junior Member
 
Join Date: Aug 2017
Location: Marion
Posts: 2
When you ordered yours where did you get part mine is like yours and cannot find in online catalog.? Thanks Brucesr
__________________

Brucesr is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 09:19 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.