Stabilizers won't move

[Dr.Green]

Hello Folks
I have a Jayco Spinter with two leg stabalizers. They just quit. I also have a red light indicating that they are extended.

I check every fuse - all good. I tried to manually extend - no deal.

I checked the switches - good.

Next is to disassemble the jacks and test the power to the motors and then the motors.
Any suggestions as to what I may have missed?
cheers
DrGreen

[Grumpy]

Try unplugging the controller to reset it.

[sirrealone]

I would assume there has to be a manual override of some kind.