Also, if you have to replace it. Take the time to put it in an easy to get to location. If you keep the camper, over the years you'll will be back at this location.
__________________
Smooth Sailing,
Ric and Jan Golding
Southern Illinois
2016 Jayco Seneca 37FS
2016 Chevrolet Traverse
2018 Cheverolet Silverado
Also, if you have to replace it. Take the time to put it in an easy to get to location. If you keep the camper, over the years you'll will be back at this location.
Adding some soft flexible hose, and soft mounting pad, to help silence the pump.
Adding some soft flexible hose, and soft mounting pad, to help silence the pump.
Maybe this is a dumb question, but can the water pump be installed anywhere in the water line or does it need to go "early" in the water line from the tank prior any branches to the faucets?
as long as the suction hose towards the FW Tank is connected (and the winterizing Anti-Freeze system) - the discharge can be anywhere in the Cold-Water-Line.
Most practical and logic is: where all FW valves are located.
__________________
2014 Ram 1500 CrewCab 4x4 5.7 Hemi 3.92 Rear and Air Lift 1000
2005 Jayco Jay Feather LGT - 29Y GVWR-7000 lbs.
Dexter Axle Lift 4-9/16" - installed with sub-frame.
Pro Series 1200 lbs. WDH with Double Sway Bar.
Champion 3100/2800 watt Inverter/Generator-Onboard Solar Power
Maybe this is a dumb question, but can the water pump be installed anywhere in the water line or does it need to go "early" in the water line from the tank prior any branches to the faucets?
Technically you can Tee into the cold water line anywhere. You still need to have your pump's pickup tube feed from the FW tank. I would also recommend keeping your winterizing bypass, but it could be relocated.