Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 02-24-2014, 01:38 AM   #1
Junior Member
 
Join Date: Feb 2014
Posts: 4
2014 Redhawk 26xs lighting

Just traded in a 2006 Granite Ridge 31 ft. for a 2014 Redhawk 26 ft. When I turn the interior light switch on there is a long pause before the lights come on or I have to switch off & on again before they come on. Is this normal or do I have a problem?? Thanks..
__________________

dragracin is offline   Reply With Quote
Old 02-24-2014, 06:33 AM   #2
Senior Member
 
TX_Arvee's Avatar
 
Join Date: May 2012
Location: Pearland, TX
Posts: 514
Is it just one interior light or all interior lights? Assuming you are speaking of coach lights and not the E-450 lights.. If it is one light, you may have a loose connection, damaged wire, bad switch, etc..
__________________

TX_Arvee is offline   Reply With Quote
Old 02-24-2014, 09:18 AM   #3
Senior Member
 
The Hawk's Avatar
 
Join Date: Mar 2011
Location: Stockton, CA
Posts: 128
The dealer should have discovered this problem when they were suppose to do a check out of your Redhawk. Also did the dealer do a walk around with you.
Sounds like it is time for some warranty work.
Jim
__________________
Jim and Sharon
Jayco 2011 Greyhawk SS31
Stockton, CA
The Hawk is offline   Reply With Quote
Old 02-24-2014, 09:27 AM   #4
Junior Member
 
Join Date: Feb 2014
Posts: 4
It is the three interior lights that run off the switch by the entry door. Of course we had a walk through, the lights were already on, but we did turn off & on & all worked well. Once the lights come on they will work if you turn off & on.. Seems like it is that first initial time that you turn on.. Thanks
dragracin is offline   Reply With Quote
Old 02-25-2014, 12:49 PM   #5
Junior Member
 
fivejackie's Avatar
 
Join Date: Nov 2012
Location: Lake Elsinore, CA
Posts: 26
That's not normal, take it back to the dealer.
__________________


Don, Lake Elsinore California
Jayco 2013 Redhawk 26XS
Ford 2012 E450 V10
fivejackie is offline   Reply With Quote
Old 02-25-2014, 01:32 PM   #6
Senior Member
 
TX_Arvee's Avatar
 
Join Date: May 2012
Location: Pearland, TX
Posts: 514
I would start at the switch and check all the connection. Then pull down each light and check those connections.
TX_Arvee is offline   Reply With Quote
Old 02-25-2014, 06:39 PM   #7
Senior Member
 
Grumpy's Avatar
 
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 5,041
Where are you located and how cold is it? Flourescent lights, especiallly 12v ones don't like extreme cold.
__________________

__________________
DISNEY LOVERS
PINNACLE 2015 38FLSA. aka: "Roam Sweet Home"
Grumpy is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 09:18 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.