We have a 2018 Redhawk 31xl. When I purchased it, our kids were 7, 4 and 2. I noticed the seatbelts Jayco uses are slick - they won't maintain a tight connection on a car seat. You'll need to retighten every time you use it or it'll be unsafe - or use a clip to keep the seatbelt tight to the car seat.
I bypassed the seatbelt entirely by adding anchor points. Just undo the bolt with the seat belt and add or replace with a child seat anchor. (Take note of the washers - you want the lock washers on there in the same spot.) Then, you can install your car seat just like you would in your car.
You will also need to secure the upper seat connection. If you don't, the seat flies forward at the table when you stop. Other manufacturers have anchor points, Jayco does not. I ended up looping a very heavy duty axle strap (10,000 + lbs) through the seat belt framing and used that to tether the upper strap.
Whatever you do, when you're done your seat should be secure. You should be able to pull and yank on it with very minimal movement - just like your car.
|