EEZ tire TPMS sensor installed

[qnghiem]

All, Does anybody have an issue with EEZ tire TPMS sensor installed on greyhawk? I have an issue with air leak after installing the sensor. EEZ tire told me the spring load ball baring needs to remove in order for the sensors to be installed for the front tire and also I need a short 1.5 inch valve stem extension to extend beyond the hub for rear tire. Any suggestion appreciates it.

Thanks.

[phuggit]

We have a Seneca, but we installed steel valve stems on the inner rear wheels. There are o-rings inside the TPMS sensors. If the rings are damaged or not tightened down enough air will leak out of the valve stem. Gotta be careful not to tighten them too much also.