Melbourne with MB Chassis Mods

[Pfflyer]

Originally Posted by pconroy

That's probably code.
Somewhere.

As a former lineman (phone not power) that looks like a nightmare. I am guessing they used twisted wire verses solid because it flexes as the slide goes in and out.

[pconroy]

Originally Posted by Pfflyer

As a former lineman (phone not power) that looks like a nightmare. I am guessing they used twisted wire verses solid because it flexes as the slide goes in and out.

I was friends with a CIO who worked at a place that was on an acquisition terror. Gobbling up resorts at a rapid pace. He said, in all seriousness, he judged the amount of merger work for his IT dept by the wiring closet.

He said he'd ask to see those first on a tour. And if it was a mess, he figured their systems would be too.

[campaholix]

where did you get your recliners?

[Pfflyer]

Originally Posted by campaholix

where did you get your recliners?

Ashley Furniture.

Here is the one I got but it shows un-available.

https://www.roomstogo.com/furniture/...liner/18511546

We went to several furniture stores to try them out and that was the best one we found that would work and that we could actually sit on. There are others that will work. The main features that would determine what will work is width and how far from the wall does it need to be installed. If you go to a furniture store to test them out, ask for the wall hugger section and then look at widths to see what will fit and then how easy it will be to anchor it down. I don't remember the exact dimensions that you need to look for but looking at the specs on the link I provided, the front of the recliner @ 40" from the wall will work. The feet are a little closer to the wall but that 40" dimension is close to the max that will fit.

Good luck