Here is a list of what I used. I chose to put power jacks in so I could unplug and replace in case a strip failed. If you have any questions let me know.
12 pack pin switches https://rover.ebay.com/rover/0/0/0?m...2F251556407907
Used to wire hot and ground 10-Packs DC Male Pigtail Cable,30cm(10 Inch)2.15.5mm Solder 12V 18AWG Power Adapter Socket Flexible Stranded Extension Cord,Copper Wire for CCTV Security Camera System,5050 Led Strip Light(Red&Black)
https://www.amazon.com/dp/B06XKPZQXC..._I8O6AbAA4C3A4
Used to add a power jack to the led light strips where you cut them HitLights LED Light Strip Connector, 8mm Single Color 3528 - Strip to DC Jack, 4 Pack
https://www.amazon.com/dp/B006IWM1AG..._8bP6Ab9KYVTAY
Led light strips LE 16.4ft Waterproof Flexible LED Light Strip, 300 Units SMD 2835 LED, 6000K Daylight White, LED Tape, 12V LED Light Strips, For Gardens/ Homes/ Kitchen/ Cars/ Bar
https://www.amazon.com/dp/B00HSF66JO..._X4O6Ab0B6Y63Q
Multi color led kit Starlotus Led Strip Lights, SMD 5050 RGB 16.4Ft/5M LED Light Strip Kit,Waterproof Flexible 300 LEDs Lighting Rope Lights with 44-key IR Controller for Holiday Party Outdoor Decoration
https://www.amazon.com/dp/B06XS8PS8N..._T5O6AbQ8KMGES
Used these extensions to run from the multi color light strip up into a bay so I could mount the control box out of the elements. I used heat shrink to help hold the the plugs together and seal them from the elements. 2 pcs/pack black 5M 16.4ft 4 Color RGB Extension Cable LED Strip Connector Extension Cable Cord Wire 4 Pin LED Connector for SMD 5050 3528 2835 RGB LED Light Strip ,rgb wire,rgb extension cable
https://www.amazon.com/dp/B075FGSTG4..._hdP6Ab8ZFH6RX