Voyager Camera Monitor Trigger Connections

[Jags830]

Happy Sunday to all. I've decided to use an external monitor for my 3 cameras attached to my 2016 Jayco Greyhawk. I purchased a Voyager VOM719WP.

Cameras connect directly to the monitor and triggers connections are made.
The unit comes with 2 triggers I am not familiar with and ASA (makes the voyager monitor doesnt have documentation on its website.

Does anyone know where these connections are made?

1. Audio Trigger
2. Split Trigger

[Joey55]

The trigger wires of the Voyager Multi Camera Controller for Observation Monitor that you referenced are going to be the circuits you want to activate the cameras. So for example if you had a side camera that you wanted to come on when you turned on a blinker you'd tap that trigger wire into the blinker's circuit. If you wanted a camera to come on when you put the vehicle in reverse you'd use the reverse light circuit. I also recommend using the running light circuit for the rear view camera as that allows you to turn on the rear camera at any point by just switching on running lights or headlights.

[Scoutmaster253]

Originally Posted by Jags830

Happy Sunday to all. I've decided to use an external monitor for my 3 cameras attached to my 2016 Jayco Greyhawk. I purchased a Voyager VOM719WP.

Cameras connect directly to the monitor and triggers connections are made.
The unit comes with 2 triggers I am not familiar with and ASA (makes the voyager monitor doesnt have documentation on its website.

Does anyone know where these connections are made?

1. Audio Trigger
2. Split Trigger

In my 2014 31FS, the device in the attached image / file does what you are asking about. It has worked flawlessly with both the original POS head unit, and the replacement Pioneer head unit I installed a few years back.
Best of luck.