'17 seismic wave 355w, TH beds won't move

[strippedthread]

My trailer sat for months with the top bed pinned up and the lower couches/bed in the down position. I have verified the master switch is on, but when I push the switch in the garage, nothing happens.
Is there a limit switch somewhere that could be bad? If so, where would it be located? What else could it be?
Thank you for any help you can give.

[theracqueteer]

On my 4113 the master switch illuminates when in the on position. Does your master switch illuminate when switched on? If not it is most likely a fuse. If it does then the problem is somewhere after the master switch.

[strippedthread]

Yes, the master is lit. I was asking to see if there are some type of limits switche(s) they may be bad, before I start tearing stuff apart.

[RoscoW]

I believe there is an up travel limit switch, I wonder if the pinned bunk is touching the limit switch and preventing the motor from raising the lower one. It obviously worked to lower the bunk so maybe the switch came loose?