2019 Pinnacle 37RLWS

[AKRUEBBE]

Anyone know how to get to the grey tank valves on a 2019 37RLWS? My #1 grey tank valve is not opening all the way.

[billcf7]

Originally Posted by AKRUEBBE

Anyone know how to get to the grey tank valves on a 2019 37RLWS? My #1 grey tank valve is not opening all the way.

Valves are usually right at the outlet of the tank. Have to drop the under belly to get to

[robkelly]

Don't know if it's the same on the RLWS, but on the KPTS you can remove the back basement wall and get at the valves. As I recall it's only 8 screws holding the wall panel in place. I've had the underbelly open, but don't remember being able to see much of the valve, especially as the slide moves "up" to open.

[Lake Huron]

X2 on taking out the back wall in the basement. The part that the vac system is mounted to can stay, the big section next to it is the one that has to come out. You may have to also remove the small side piece where it bumps out.
My Northpoint valves were closing all the way but suddenly got real hard to open. I took my back wall out to access my valves and cables and pulled the cables completely out. The black tank one was bent pretty bad and I got that straight. I lubed them both pretty heavily with some Break Away (WD40, PB Blaster, etc) and reconnected them. They both work like a dream and have ever since I did that.

[Lake Huron]

Heres a pic of my back wall taken out. It's not the best but I think you'll get the idea. I took my vac section off because this was my drum to disc brake conversion mod and I was mounting the brake actuator right behind it. I also removed the small bump out section wall piece because they were screwed together.

[AKRUEBBE]

Originally Posted by Lake Huron

Heres a pic of my back wall taken out. It's not the best but I think you'll get the idea. I took my vac section off because this was my drum to disc brake conversion mod and I was mounting the brake actuator right behind it. I also removed the small bump out section wall piece because they were screwed together. Attachment 66231

Thanks, I'll give that a try.

[klassic]

Originally Posted by Lake Huron

Heres a pic of my back wall taken out. It's not the best but I think you'll get the idea. I took my vac section off because this was my drum to disc brake conversion mod and I was mounting the brake actuator right behind it. I also removed the small bump out section wall piece because they were screwed together.

Attachment 66231

Looks like the same guy did the plumbing and electrical on mine too! Lol.

[Lake Huron]

And I bet his name was Jedediah, prolly wore denim bibs, a hat and had a beard. Lol!