Jayco RV Owners Forum
 



Reply
 
Thread Tools Display Modes
 
Old 09-12-2018, 12:19 PM   #1
Junior Member
 
Join Date: May 2018
Location: Macomb
Posts: 28
Pictures of the factory installed accessory hitch on a 377

If anyone ordered their 377 with the factory accessory hitch please snap a picture of it and where it attaches to the frame. Also how far apart is the hitch and the bumper?

Thank you in advance!
__________________

__________________
2016 Ram 3500 MegaCab Cummins SRW 4x4

2018 Jayco North Point 377RLBH
Cruze108 is offline   Reply With Quote
Old 09-12-2018, 03:15 PM   #2
Member
 
Join Date: Dec 2016
Location: Columbus
Posts: 70
Mine has one and I would send u a pix but it’s in storage in Myrtle beach sc, and it’s probably getting ready to get killed
__________________

Pappyt2 is offline   Reply With Quote
Old 09-12-2018, 03:42 PM   #3
Senior Member
 
Magnolia Tom's Avatar
 
Join Date: Jan 2016
Location: Magnolia
Posts: 2,959
Pictures of the factory installed accessory hitch on a 377

Mine came with the hitch but it was standard equipment on the ‘16 models. Here’s a picture



Mine is welded on, not boltedClick image for larger version

Name:	IMG_1068.jpg
Views:	102
Size:	245.4 KB
ID:	44080
__________________
2016 North Point 377 RLBH, with a few mods
2014 Ford F350 Platinum, CC, 6.7PSD, DRW, air bags, Trailer saver BD3 hitch

Magnolia Tom is offline   Reply With Quote
Old 09-12-2018, 04:26 PM   #4
Senior Member
 
JohnWedell's Avatar
 
Join Date: Sep 2015
Location: Riverhead, NY
Posts: 453
I have the fifth wheel in my Sig, if you look under the back of the trailer you will find two brackets one on each side with two holes each that’s where the hitch bolts to. you can get the numbers off of that, have one made or see if you can find one that’ll fit
__________________
2018 RAM 3500 DRW, 4X4, 4.10, 6.4 Hemi, BAK-MX4 Tonneau Cover, Curt A20 hitch.

2018 North Point 315rlts with all the options.
JohnWedell is offline   Reply With Quote
Old 09-13-2018, 09:13 AM   #5
Junior Member
 
Join Date: May 2018
Location: Macomb
Posts: 28
I requested one thru the dealer but they dropped the ball and didn't order one. So when we picked up the 5'er they scrambled and "Modified" an after market one that seems to sit really low. I requested that they get a factor hitch from Jayco and they said they wouldn't because this is what I agreed too. Sorry for your incompetence, they put the aftermarket on because we were leaving early the next morning for a trip centered around using our bikes. So now I need to see if there is difference between the after market and the factory hitch they were suppose to get for us.
__________________
2016 Ram 3500 MegaCab Cummins SRW 4x4

2018 Jayco North Point 377RLBH
Cruze108 is offline   Reply With Quote
Old 09-13-2018, 09:30 AM   #6
Senior Member
 
JohnWedell's Avatar
 
Join Date: Sep 2015
Location: Riverhead, NY
Posts: 453
The factory hitch comes out just below the bumper
__________________
2018 RAM 3500 DRW, 4X4, 4.10, 6.4 Hemi, BAK-MX4 Tonneau Cover, Curt A20 hitch.

2018 North Point 315rlts with all the options.
JohnWedell is offline   Reply With Quote
Old 09-13-2018, 10:59 AM   #7
Junior Member
 
Join Date: May 2018
Location: Macomb
Posts: 28
Here is picture of the after market and how it sits below this brackets. How does the factory hitch look?
Attached Thumbnails
D3B47189-0D4E-4FFE-9E48-69EDECD12602.jpg  
Cruze108 is offline   Reply With Quote
Old 09-13-2018, 11:04 AM   #8
Senior Member
 
Magnolia Tom's Avatar
 
Join Date: Jan 2016
Location: Magnolia
Posts: 2,959
See my picture above. Yours is lower than mine. Mine is about 2” below the bumper as it is welded onto the square tubing under the frame
__________________
2016 North Point 377 RLBH, with a few mods
2014 Ford F350 Platinum, CC, 6.7PSD, DRW, air bags, Trailer saver BD3 hitch

Magnolia Tom is offline   Reply With Quote
Old 09-13-2018, 11:22 AM   #9
Senior Member
 
Join Date: Feb 2014
Location: MD
Posts: 3,553
I don’t have a 377 but I do have the factory hitch on my camper (sorry no pics at the moment) that attaches to the frame. Your dealer’s custom job is low... that setup would definitely cause my bike rack to drag.
__________________
2017 JayFlight 28BHBE
2014 JayFlight Swift 264BH (Sold)
2007 GMC 2500 Sierra Classic Crew Cab LBZ Duramax / 6spd Allison
SouthCo is offline   Reply With Quote
Old 09-13-2018, 12:12 PM   #10
Senior Member
 
NismoGriff's Avatar
 
Join Date: May 2016
Location: N.E. Ohio
Posts: 156
I'm in the same boat as SouthCo. Not a 377 but factory installed hitch that is much much tighter to the bumper than that. I've been in sites were sloped enough that if my hitch sat that low I would not have been able to level. I hate when dealerships make mistakes and don't make it right. They should have been willing to let you use that to make your trip and then swap it out with the correct part when it came in. Good luck sir.
__________________

__________________
2014 F150 SC/4X4/5.0/3.55/Equal-i-zer 12K/Ride Rite Air Bags
2017 Jay Flight 24RBS Fiberglass, 15K BTU A/C, Thermal package, Alloy wheels
Goodyear Endurance Tires, Morryde CRE-3000 w/Wet Bolt Kit and X-Factor Brace.
(ordered 5/9/16, arrived 10/17/16, brought home 4/14/17)
2005 Trail Cruiser TL-26QBH (sold)
1984 Coachmen PUP (sold)
NismoGriff is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jacyo, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 02:23 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.