TPMS Do Not Pair with JayCmd Control

[l&mtripp]

We are new owners of a 2022 Pinnacle 32RLTS and the tire pressure sensors do not want to pair with our control system. Is anyone else having this problem? Leaving for our first extended outing tomorrow. Thanks!

[Learjet]

Originally Posted by l&mtripp

We are new owners of a 2022 Pinnacle 32RLTS and the tire pressure sensors do not want to pair with our control system. Is anyone else having this problem? Leaving for our first extended outing tomorrow. Thanks!

why didn't it come paired from factory? are these sensors that did not come with your trailer...non-BmPro sensors?

[Edutron]

I have a 2020 32RLTS with a 2020 GMC quad Denali longbed as well (dually). To initially set up the Bluetooth sensors in your coach wheels I use a (Relearn Tool Super EL50448 for GM and Ford Tire Pressure Monitor Sensor TPMS Reset Tool or similar) Mine is a 2020 model but its the same and you can get them on Amazon to have your GMC info system (trailer pressure) to appear on your screen. Simple to use and once the sensors get educated its most often a one and done deal. Allows your truck and the onboard computer which is designed for this sole purpose to learn each trailer wheel sensor and will also work with a pull behind trailer behind coach. Just set up as a tri-axle and boom. Truck will sense that far because the sensors I believe are in the rear bumper. So far I think GMC is the only one that will and can use factory info system to sense two trailers. At least mine does. Your coach may have to have the Bluetooth sensors installed in the wheels. My GMC came with 4 extra Bluetooth sensors as it is an option when ordering your truck. You can get them on Amazon now aftermarket. Once I got the coach I had them installed immediately. Jayco gives you those BMPRO screw on type (airvalve screw on caps) and they are worthless as far as I'm concerned. Go to GMC parts and look up the sensors, they are the same that is installed in your truck wheels.

[ARoamer]

Originally Posted by l&mtripp

We are new owners of a 2022 Pinnacle 32RLTS and the tire pressure sensors do not want to pair with our control system. Is anyone else having this problem? Leaving for our first extended outing tomorrow. Thanks!

I have issues with the BMPRO TPMS. After complaining, dealer supposedly installed a booster node, but my left rear still fails to connect.

First, check the batteries in each TPM, 3 of mine were dead.

When it's time for new tires the GM TPMS sensors that came with my truck are going in the trailer wheels, from my experience the BMPRO ones aren't very reliable. Plus the GM sensors send info directly to your tow vehicle and will show problems on your driver info center, not your phone app which you may not see in time.

[l&mtripp]

Guys - thanks so much for the info! Sorry it took so long to respond but was having too much fun with my grand daughter. I will definitely be looking into getting the right sensors to sync the trailer to my truck... that would be awesome! I'm sure I will have questions once I get the project underway. Thanks again.

[jetlag]

We have them on our Pinnacle, and they work just fine. Check for videos on YouTube or contact BMPRO. Ours did come already paired when we picked it up.