I did this today and thought I would share results. Values are from One Control touchpad.
Before. After Manual Level. Auto Level
Fro/Rear. 0.0. +0.9. 0.0
Si/Si Fro. +.10. +0.4. +0.2
Si/Si Rear. +0.1. +0.5. +0.1
LF. 8.8. 5.5. 3.2
RF. 8.7. 4.7. 2.7
LR. 8.8. N/A. 7.9
RR. 8.6. N/A. 7.4
LR. 8.5. 9.2. 9.3
RR. 9.3. 9.6. 9.8
After dong zero calib. I tried to auto level but got out of stroke error. I hooked up truck and did a retract all. I then unhooked and had a successful autolevel.
On our last trip we noticed the door would not stay open. That prompted me to put a 2’ level on the full length beam underneath. Included are before and after pics. The side to side was off as well.
The manual came from the LCI website.
Linear Mode
