seneca mattress

[hammer55]

we have the FS which has the king and the rounded foot end, and it goes up under the slide when it comes in, and can be only six inches high, what have others done for a new mattress

[SloPoke]

As Stacy and I were combining households - we ended up with an additional bedroom of furniture that did not have a room to go in. Thus having an extra mattress...

We took the Tempurpedic mattress that was in our home to a upholstery shop where they took the memory foam out of the cover and trimmed it to be the new size of the Seneca Mattress (it was already the correct height). They then altered the cover to fit the new size. It cost us a couple hundred dollars for a mattress that fits perfectly and is actually more comfortable to sleep on that our mattress in the house.

[RoWest]

https://www.mattressinsider.com/rv-mattress.html
5.5" ELATION GEL FOAM RV MATTRESS W/ORGANIC COTTON
the pull-down options have 10" radii to match existing
Reversible for firmness with almost 5 years now on ours.

[rgolding]

3 months after we bought our Seneca 37FS October, 2015, we replaced the mattress with a Dual Chamber Sleep Number Bed of dimensions for the king size mattress. I think its considered a "short King" Within about 4 months, we added a block of hard cell foam under each chamber, because at 100, the bed was too soft for either of us. Been happy with it ever since and thinking of getting one for home. it deflates easily to fit under the slide when it comes in. We live in our Seneca about 8 to 9 months a year.

[hammer55]

thanks all,