Quote:
Originally Posted by muckinfuss
No cleaning solution. MSD required reading. We've been using them for years in a finish/detail operation. Mildly abrasive means 3000 (dry) to 5000 grit (wet) . We buff urethane clearcoat at 2500 grit. If you are messing up paint then the paint is junk or you're pressing just a wee bit too hard. They work just fine with a light touch. The rag used to wipe down black streaks when using simple green is more 'abrasive'.
|
You're right. I researched a little further into its makeup. No added cleaner.
Our first pop up had a black streak in the middle of the linoleum floor, from the rubber seal on the little dinette slide out. Nothing the DW used would touch it until our neighbor brought over this white wimpy-looking sponge thing. First time we ever saw Magic Erasers. We were blown away when it took the black streak completely off the floor. Been using them ever since.
There are some surfaces they might damage or remove a gloss from. Here's what I found listed. We all know the internet is always right...right?
"What can you not use Magic Eraser on?
When not to use Magic Eraser
Shiny painted, enameled, sealed, or varnished surfaces. Magic Eraser can strip away the finish.
Wood. Magic Erasers can scratch and strip the finish.
Your car. ...
Natural stone surfaces, including granite and marble. ...
Non-stick pots and pans. ...
Stainless steel. ...
One-of-a-kind collectibles. ...
Screens."
I'd hate to have anyone that might be a bit aggressive with one. dull the surface they're wanting to clean.