Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 04-11-2016, 03:32 PM   #1
Junior Member
 
Join Date: Sep 2014
Location: Omega
Posts: 6
Coleman Louver Assembly

2006 Jayco Travel Trailer
Jay Feather EXP 19H
Coleman AC Unit Series 8000
I need to replace Louver/ Vane in my unit. This is used to control the air flow coming out of the ac. There are two. One in the front and one in the back. Mine have become brittle and are breaking off as you try to adjust them. Any ideas on the best way to do this? It looks like they just fit into two holes (One on the left and one on the right) Do you just bend the main shaft until it snaps in. Don't want to break it so I thought I would ask.
__________________

fredb38 is offline   Reply With Quote
Old 04-12-2016, 02:13 PM   #2
Junior Member
 
Join Date: Sep 2014
Location: Omega
Posts: 6
I didn't get an answer so I guess nobody has done this or maybe I didn't explain it right. I went ahead and gave it a try. The old vanes just fell apart when trying to remove them. The shaft they are mounted on did bend without breaking so I was able to remove them. The new shaft was a little more flexible so I was able to bend it enough to get it into the holes. The new vanes just snap onto the shaft so no problem there. Job completed.
fredb38 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 03:27 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.