Furrion Vision S 3 Cam. System, Left side inop.

[Cookiejar]

The left, side-marker camera on my Furrion S, 3-Camera system with 7" monitor and Sharkfin rear camera, is inoperative - doesn't come on/register/nada. The right side and rear cams work fine. New system installed/purchased with our new Jay Feather, 25RB, last May. Worked fine on our last trip in October, 2021. Towing with a 2020 Chevy Tahoe. Still under warranty, but dealer is not convenient. Any suggestions on what I might try on my own before I bite the bullet and trek back to the dealer? I'm a fairly handy/DIYer. Thanks mucho.

[Shaun1]

I'd try re-pairing it if it worked before. Could be a loose wire. I assume it was prewired for the cam? I had to re-pair mine twice before they connected right

[Yooper906]

Just a quick reply, are the left side running lights coming on o.k.? These are powered from the truck lights, and on my trailer the left and right running lights are on a different circuit, not truck side but trailer side after the 4 square box where your 7 way splits.

[Cookiejar]

Thanks Shaun. Already tried re-pairing several times. Wiring check next, I guess. Safe travels.

[Cookiejar]

Thanks Yooper906. Will get the test light out of the drawer. Sfae Travels.