How do you access to remove audio player in entertainment center?

[Diamonddave]

New Jayco 28RLS with the built in DVD, audio unit. I wanted to access that unit to see the connections going in but I can find no way to get to the unit without ripping out stabled in panels above, below and to the side of the unit and there appears to be no way to remove the unit from the outside, front.

It looks like they installed the unit, then put a side, separator panel between it and the shelf area to the left and on one side of this separator partition panel, there is 1 screw and then on the front side, they stapled it from they outside, so the panel will not remove. The same for the floor panel underneath it.

Surely these guys didn’t do that so you have to tear out the panel just to access the unit but I sure can’t find any other way?

[LawnFlamingo]

There should be a cover you can pop off the front of the radio/DVD unit that gives you access to the mounting screws. After that you can slide it out easily.

[oldmanAZ]

Welcome to the forum.

What year & model is your new Jayco? Including that info may help others.

But, unfortunately, I can't help with your question. Our 2015 JayFlight audio unit is held in with visible screws in the corners.

[Diamonddave]

Originally Posted by LawnFlamingo

There should be a cover you can pop off the front of the radio/DVD unit that gives you access to the mounting screws. After that you can slide it out easily.

That was it....thanks. Popped the bottom cover off and the mounting were then visible.

[BeGin]

Thanks Folks. I was trying to figure out access to the input ports on the AV unit