I got barely any air flow to the bedroom. I looked at the layout of the ducts at the plenum and saw that the air comes from the squirrel cage fan with force toward the rear ducts, leaving little air for the front of the camper. I’m too cheap to spend $200 for the RVAirflow, so cut a piece of 1/4-inch plywood to fit in the plenum and direct some of the air toward the front duct. It cost me nothing and the air flow is much more balanced. The bedroom is comfortable.
__________________
It's not a hot water heater. It's a water heater. If the water were hot, you wouldn't need to heat it.
|