New 2020 Jayco Jay Flight Slx 235RKS satellite

[JimOntario]

Hello all,

I have a new TT and I plugged in my satellite feed to the receptacle on the outside. I am getting a signal but that is all. It won't connect to the service. If i put the feed directly in to the receiver it works fine. I tried turning off the antenna button but that didn't work.

any ideas?
thanks

[Grumpy]

Satellite won't work through an antenna splitter which is in the system.

[JimOntario]

thanks, but how do I bypass? The connection on the outside says satellite input so it is supposed to work for satellite

[Grumpy]

Originally Posted by JimOntario

thanks, but how do I bypass? The connection on the outside says satellite input so it is supposed to work for satellite

Is there one marked cable? They may be reversed or labeled wrong.

[JimOntario]

yes it says cable/satellite input

[Grumpy]

Originally Posted by JimOntario

yes it says cable/satellite input

If it's only one connection then it goes through a splitter and will not work with Sat, only Cable. You will need to run a direct line or go through a window with one of these.

https://www.amazon.com/dp/B01FLKPBEI...xpY2s9dHJ1ZQ==