Jayco RV Owners Forum
 


Reply
 
Thread Tools Display Modes
 
Old 04-07-2010, 07:35 AM   #1
Junior Member
 
Join Date: Apr 2010
Posts: 1
water outside shower area

Have a jay flight g2 27bh. Not happy with the design of shower because water seems to get all over walls and floor outside shower area. The shower interior seems to be stuck on by 2 sided tape as i can continually push on the walls and it will grab for a little while then eventually pull away. Does anyone recommend a shower door or anything else that will prevent the water from leaving basin area. I am worried that the water that gets on floor and under walls (there not caulked either) will cause water damage.
__________________

jlol33 is offline   Reply With Quote
Old 04-07-2010, 08:53 AM   #2
Junior Member
 
Join Date: Feb 2010
Posts: 8
I had the same problem with my shower walls coming loose. I installed some plastic drive rivets, problem solved.
__________________

Morsecodeham is offline   Reply With Quote
Old 04-09-2010, 01:07 AM   #3
Junior Member
 
Join Date: Feb 2010
Posts: 1
I agree I have the same problem, water seems to run down the top of tub and roll off onto the floor. I found this but have not tried it yet. Looks like it might work.
http://www.pplmotorhomes.com/parts/r...ower-doors.htm
JaycoJerryJoannNV is offline   Reply With Quote
Old 04-11-2010, 03:33 PM   #4
Member
 
Join Date: Jan 2010
Posts: 34
Quote:
Originally Posted by Morsecodeham View Post
I had the same problem with my shower walls coming loose. I installed some plastic drive rivets, problem solved.
That is how mine was attached form the factory to the walls. So far Jayco has replaced all the rivets at least once under warranty.
__________________
2008 Jayco Eagle 299RLS
2007 Chevy 2500HD D/A
Dale_S is offline   Reply With Quote
Old 05-12-2010, 01:07 PM   #5
Senior Member
 
mikefos's Avatar
 
Join Date: Dec 2009
Location: Fredericksburg, TX
Posts: 207
Quote:
Originally Posted by Dale_S View Post
That is how mine was attached form the factory to the walls. So far Jayco has replaced all the rivets at least once under warranty.
Hi,

Can one of you post pictures of this rivet application? Did it solve the problem of water on the floor outside the tub/shower?

Thanks,

Mike
mikefos is offline   Reply With Quote
Old 05-12-2010, 02:00 PM   #6
Senior Member
 
Gone Camping's Avatar
 
Join Date: Feb 2010
Location: Ohio
Posts: 268
Need Pictures as We have no issues with our shower.
__________________
:D 2007 Ram 3500, 2008 Eagle 291
Gone Camping is offline   Reply With Quote
Old 05-12-2010, 03:03 PM   #7
Senior Member
 
Join Date: Nov 2009
Location: Orange County, N.Y.
Posts: 631
On my 32BHDS the tub walls can be pressed in, but this is by design. The tub has a top lip that extends up behind the shower walls several inches. The reason there is some space between the shower walls and the camper walls behind the shower walls is to help dry any humidity/water that gets trapper there.
I have been looking for some triangle shaped pieces, that I can't remember where I saw them on someone elses tub. They attach in the corners of the tub and redirect the water run off back into the tub.
__________________
Joe, Joyce , 4 Kids and 3 Dogs.
2004 V-10 Excursion with Hellwig sway bar, Roadmaster Active Suspension, Bilstein shocks and steering stabilizer, Super Duty Tow Mirrors,
3.73 Gears, Reese dual cam, Prodigy brake controller.
2010 Jayco Jay Flight G-2 32 BHDS
usmc616 is offline   Reply With Quote
Old 06-03-2010, 11:21 PM   #8
Junior Member
 
Join Date: May 2010
Location: Corvallis, Mt.
Posts: 15
Our trailer is new & we haven't used the shower yet. My wife did try a tub bath. She is small, so she could fit. Think I will stay with showers.

I was told by a friend there is a problem like you're talking about (water running off tub to floor.) One solution is a corner web type plastic piece that fits in the outer corners. I bought a set but decided against using it because I was afraid of kicking it when getting in & out of the tub. I took my friends advise and used a flat plastic molding strip bought at Lowes. It runs the full length on top of the tub rail. It measures about 3/4" wide & only about 1/4" thick. I fastened it with silicone adhesive. Hope it works & think it will.
__________________
2010 Jay Flight 23FB
99 Silverado 3/4 ton 6 liter 3.73
08 Polaris quad
Billy Dean is offline   Reply With Quote
Old 06-04-2010, 11:54 AM   #9
Site Team
 
Denise's Avatar
 
Join Date: Jul 2009
Location: Mostly the US
Posts: 10,004
Quote:
Originally Posted by Billy Dean View Post
I took my friends advise and used a flat plastic molding strip bought at Lowes. It runs the full length on top of the tub rail. It measures about 3/4" wide & only about 1/4" thick. I fastened it with silicone adhesive. Hope it works & think it will.
Can you post a pic?
__________________
moderator
Denise, DH, grandkids, and two rescue pups
-2016 Jay Flight 29QBS Elite
-2016 Ford F-250 XLT 4x2, 6.2L EFI V8, 4.30 Elec Lock, Heavy duty Alt
Denise is offline   Reply With Quote
Old 06-04-2010, 04:07 PM   #10
Junior Member
 
Join Date: May 2010
Location: Corvallis, Mt.
Posts: 15
Will try & post a picture next week when I get the trailer back from the shop.
__________________

__________________
2010 Jay Flight 23FB
99 Silverado 3/4 ton 6 liter 3.73
08 Polaris quad
Billy Dean is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 08:25 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.