Quote:
Originally Posted by Jacjayco
X2 what a David said. Also, if the sensor is dusty, it will shut the fireplace off. Remove glass cover, clean and dust everything. Hope it works!
|
I only found out about it by mistake. I had the fireplace on while I was doing some work inside. I had moved a chair too close to the fireplace and after a while I was not getting heat and the red LED was flashing. The remote would not respond to any commands. I manually powered off the fireplace and then restarted it and it worked just fine. I had to dig out the manual and figure out what the flashing light message.
__________________
David
2019 Jayco Eagle HT 24.5CKTS (new to me 9/2022)
2016 F250 6.7L CCSB 4x4 - AirLift 5000
Anderson Ultimate 5th Wheel Hitch