Stepping up to a Jayco SLX 195RB

[Kim Gass]

Originally Posted by Crooks

All I did for the computer chair was get a few small D-ring that screws into the wall or floor and just wrap a bungee cord around the chair hooked into the D-rings. Any of the travel trailers you see that have a dinning table with stand alone chairs from the factory have some type of ring on the floor to strap the chairs down while towing.

Thanks! I never thought of that.. Guess I haven't gone to enough RV shows yet!

[MontanaRick]

First, thanks for showing this mod can easily be done, and looks great. I did have a few more questions.

First, what was your solution for the lp detector? I'm guessing you just pushed the wires in the wall and secured it to the wall, or did you cut a hole and recess it?

Second, how much is the wheel well in your way? Your chair by the door actually looks closer to the wall than I would have expected, but I'm guessing here that it's just camera distortion or my weak brain playing tricks on me.

Thanks.

[dexstrom]

>>First, what was your solution for the lp detector? I'm guessing you just pushed the wires in the wall and secured it to the wall, or did you cut a hole and recess it?

That’s what I did, someday I may recess it but I’m too lazy for now.



>>Second, how much is the wheel well in your way?



Not in the way, the chair needs to be out from the wall to swivel and it’s exactly the distance that the wheel well sticks out, the chair swivels over it. That was a very pleasant surprise.


Daniel

[MontanaRick]

Thanks

[RogerR]

I added a shelf in the pantry cabinet beside counter. I used quarter round and 1/4 inch oak finish plywood. I had some leftover stain that was not too far off.
This will give us a place for silverware and kitchen utensils without taking up to much space.
After looking the spouse has arranged a silverware drawer that is adjustable in front and a second one with cooking utensils behind it.

We were both tired of having to un-stack stuff to get to silverware.