I was looking for the same for my '18 Octane T30F. I used a "Pingel" in my 6 x 10 enclosed trailer for my Dyna WideGlide, then RoadGlide Ultra for 18 "+" years, worked very well, is removable, but the two small mount lock points remain in the floor. Drawback is you will have to secure the mount lock points & the retention screw nut through the floor. Here is a link for them <
PINGEL® - Removable Wheel Chocks and Hardware >. These are fairly inexpensive & work very well.
My T30F though has insulated /enclosed bottom & I really do not want to pull all that apart. So the other I found, that has no drilling & is completely removable is the "No Drill Black Widow" one at this link <
https://www.discountramps.com/motorc.../BW-PRO-CHOCK/ >. Looks like it would work, as the chock is only to hold up / steady the bike until you strap it down. Also, I ALWAYS use 4 strips (1 per corner of bike) when securing in a trailer. This has proven its self time and again when I have had to make a few emergency stops with the trailer due to idiots in front of me, or the rough roads. Nothing moves, when secured on all 4 points.