|
04-03-2017, 02:49 PM
|
#1
|
Member
Join Date: Mar 2017
Location: Madison
Posts: 42
|
17C New to Me: Question#2: The Roof
Okay, so as i said before we just picked up a 2010 17 C last week. Thanks to the forum members here, we solved my first issue. Now, on to question two.....
I climbed up to get a good view of the roof and it is filthy! My question is how do I clean it? What products to clean and seal? And, can I walk on it or do I just try to clean it from the sides as best I can? I would think I need to get on it somehow to check the sealants around A/C, vents, etc....If so, what's the method for doing this? Just climb on or use a piece of luan or something underneath me. Sorry for all the questions, I just want to do it right the FIRST time and not mess something up the FIRST time!!!! Thanks in advance!
|
|
|
04-03-2017, 03:31 PM
|
#2
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,111
|
Spic & Span and a scrub brush work wonders. As to sealing around the vents etc, buy a roll of ETERNABOND tape and it's once and done.
No need for any type treatment on the roof itself.
__________________
DISNEY LOVERS
|
|
|
04-03-2017, 03:44 PM
|
#3
|
Member
Join Date: Mar 2017
Location: Madison
Posts: 42
|
Grumpy - Thanks again, you rock! I had done some research online but heard read lots of different approaches. I greatly appreciate your help! Question....can I get on the roof or not???
|
|
|
04-03-2017, 03:57 PM
|
#4
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,111
|
My son used to climb on his.
__________________
DISNEY LOVERS
|
|
|
04-03-2017, 05:59 PM
|
#5
|
Member
Join Date: Mar 2017
Location: Madison
Posts: 42
|
Thats good enough for me! I will try!
|
|
|
04-03-2017, 08:00 PM
|
#6
|
Member
Join Date: Apr 2014
Location: Bowling Green
Posts: 76
|
Depends....how much do you weigh (that's a rhetorical question BTW!). I'm 180 and don't have any problems getting on the roof. I try to stay around the edges though. BE CAREFUL! It can be slicker than pelican snot up there! I add a little Borax to my soapy wash and scrub with a long-handled soft brush. Rinse and repeat. Then immediately wash the trailer (and awning) as the sides get pretty nasty from all of the chalky crap coming off of the roof. Check all the joints and seams and have some Eternabond tape ready. Just bought a 20 ft roll on Amazon for less than $30.
__________________
2014 Nissan Titan & 2011 Jayco JayFeather X17C
|
|
|
04-03-2017, 08:18 PM
|
#7
|
Member
Join Date: Mar 2017
Location: Madison
Posts: 42
|
penguin149 - I'm around 180 myself and didn't know if it was safe or not...I wasn't gonna go stomping around or anything, just want to be safe and not end up inside, or I guess on the ground outside from the roof! I have been looking for Spic and Span around here and can't find it so I may go with your suggestion of the Borax. Thanks again for the response!
|
|
|
04-07-2017, 02:10 PM
|
#8
|
Site Team
Join Date: Feb 2011
Location: DeWitt, MI
Posts: 1,213
|
Quote:
Originally Posted by Grumpy
Spic & Span and a scrub brush work wonders. As to sealing around the vents etc, buy a roll of ETERNABOND tape and it's once and done.
No need for any type treatment on the roof itself.
|
100% this
__________________
MODERATOR
2007 Jayco Feather 19H
2008 Ford Explorer SportTrac
|
|
|
04-08-2017, 10:47 AM
|
#9
|
Member
Join Date: Mar 2017
Location: Madison
Posts: 42
|
Snake - Thanks for the response! That further makes me feel better about it!
|
|
|
04-08-2017, 06:36 PM
|
#10
|
Member
Join Date: Mar 2017
Location: Madison
Posts: 42
|
One more question - should I not worry about using any Dicor or anything on any areas that look questionable, or just go over it with Eternabond? I cleaned the roof via just dry brushing the other day which made a huge difference, however, I was a little concerned to do any major scrubbing on the joints as they had a few cracks. So, I wanted to get what I need before going in too deep. If Eternabond is the way to go, I will have to order it....which I don't have a problem doing if that's what I need...I guess I didn't know if I need to re-Dicor first and then eternabond or just Eternabond. Sorry if that sounds dumb but I just wanna be sure. THANKS!
|
|
|
04-08-2017, 07:04 PM
|
#11
|
Senior Member
Join Date: Nov 2011
Location: Where ever the boss says we're going.
Posts: 16,111
|
Just ETERNABOND first. I usually go around the edges with a small bead of DICOR when finished. Clean the old DICOR with a little acetone.
__________________
DISNEY LOVERS
|
|
|
04-08-2017, 08:58 PM
|
#12
|
Member
Join Date: Mar 2017
Location: Madison
Posts: 42
|
10-4, Grumpy!
Thx!
|
|
|
04-08-2017, 09:05 PM
|
#13
|
Member
Join Date: Mar 2017
Location: Madison
Posts: 42
|
Would I be good to scrub the roof and then apply Dicor as needed since I don't have the Eternabond and then go back in and cover seams with Eternabond when I get it in....or would you just wait to do all at once? I guess I'm just kinda excited and antsy to get stuff done and don't wanna wait....With Eternabond would you seal every joint on the roof? Also, what about the seams around the remaining joints? Do you take them apart and reapply butyl tape underneath or what's the process? Again, I'm just trying to do it right the first time...thanks to everyone in advance!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|