Update , the dealer is a dipstick , the wire harness is located on the left side of the steering wheel column right above the parking brake. It's a plug and play install. Tekonsha Prodigy p2 part # 90885 , quick connect harness # 3034-p
I'm pulling a 14' inclosed trailer w/ electric brakes. I don't know what a brake buddy is. Is that for towing a car ? I just finished up the install tonight and the brakes and all trailer lights work good. But I was wrong about the brake controller harness. Heres how this went down , the 3034p is for new ford pickup trucks. The f53 uses the older style harness and the part number is 3035 p. I hope this helps someone else out. Like I said in the first post , the RV dealer was clue less and told me that it would cost around $800.00 to have this done. I did it myself for under $200.00. It took me about 1/2 hour !