Water pump location -- Melbourne...

[thirdktm]

It's a 2017 Melbourne 24M.
Where in the world is the water pump located?
It has not failed yet, but I want to be prepared.

[Pfflyer]

On a 24k it is in the wet bay tucked in behind the selector valves. I think there are some location differences on the mechanicals between our models but I would think it would be logical to put it close to that location.

[thirdktm]

To Pfflyer: Does accessing it require removal of the panel in the water closet?
Probably so??

[thirdktm]

To Pfflyer: Does accessing it require removal of the panel in the water closet?
Probably so...

[Revy]

Yes, removing the panel will give you access to the pump. It's the two screws on the right and left hand side.

My Melbourne (2019) has <some> access to the pump by reaching under on the right hand side. It's too narrow to get any work done, but enough to be able to hand tighten the hose if (when) it came loose.

[Pfflyer]

To add to what REVY said, the only access needed for routine maintenance is emptying the filter bowl on the pump when winterizing or cleaning the screen filter. Both are easily done by reaching up either by feel or you can see it if you get low enough. Let us know if yours is the same.