2020 Northpoint 310RLS sensors not accurate

[bmcevers_13]

We have a 2020 NP, had it for a year. Love it! But, the sensors for the water tanks do not work. Even when it is fully empty the tanks will show 2/3 full. We used the fresh water tank this weekend and after filling it up, got to our campsite and it showed 2/3 full when we know it was full. Out biggest concern if the black tank. . We are still under warranty. Not sure if there is anything that the dealer can do. Anyone else had this issue?

[TWP723]

Most times, the sensors have debris on them from the tank and give a false reading. Your tank is most likely empty but something may be hanging on the sensor. There probably isn't anything wrong with the sensors themselves.

[Grumpy]

Wire could be loose on the FW tank and as TWP723 said all it takes is a small piece of TP to mess up the black tank guage.

[bmcevers_13]

I totally understand about the black tank. However we do not put tp in the toilet. I am sure that it has happened once or twice. However the fresh water holding tank and the grey tanks have the same issues. I guess that we will talk to the dealer....We have another year of warranty....

[TWP723]

Hmmm.. all it takes is once. But I didn't know about the grey giving a bad reading. And the fresh tank I chalked up to losing water during transit. Strange. I agree, take it to the shop and let them figure it out.