SaniCon

[csper29605]

I have a 2018 Jayco Northpoint 377RLBH. Does anyone out there have the sanicon installed on there unit and could you please take pictures of the plumbing underneath the rig. We just had it installed and they messed up on plubling so would like to see how Jayco does there plumbing for the sanicon.

[prm99v6]

I'll try and get pics (only have one on me but doesn't show much).

The sanicon unit is connected to the end of the main 3" drain line with a gate valve just before the pump/grinder unit. Then is a 2" (roughly) flex hose from the end of the pump/grinder that connects to a 2" black abs pipe that is 20' or so long. Then another 2" flex line from that into the compartment where the hose is stored. I don't know what the connection looks like between the flex hose and the sanicon hose with the head attached.

Mine leaks at both sides of the ABS pipe where the flex hose connects. It's just a rubber coupling slipped over the pipe with hose clamps. My first trip out, I found this pipe dangling freely and the ONE support Jayco used to mount the pipe had come off. I added three supports not so it is nice and secure.

[prm99v6]

Here is the ABS pipe that runs down the length of the trailer. I’ll try and get more pics tonight.

[csper29605]

Could you take a picture from the beginning of the pipe where it leads out of the tank to the back if that is possible. I really appricate it very much??

[csper29605]

prm99v6 Wondering if you could take a picture of the inside cabinet in the back of the unit or anyone that has a sanicon. Guys I really appricate any help in this.

[prm99v6]

[prm99v6]

In order from the main drain line to the box.

[csper29605]

Prm99v6 you are awsome and I really appricate it very much. These pictures have help so much

[prm99v6]

[emoji106]