Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-26-2022, 09:49 AM   #1
Junior Member
 
Join Date: Feb 2022
Location: Hudson
Posts: 9
37K bedroom slide out stuck (schwintek) — HELP!!!

Hi all,
Was supposed to be checking out of the campground this AM but our schwintek slide is stuck on our 37K bedroom slide.

We tried the retiming trick of run out, hold for 5s, run in, then repeat, but it didn’t help.

We are looking for the schwintek controller so that we can manually put in the slide. Does anyone know where it is? I have searched all over.

Thanks in advance!
horsegoalie is offline   Reply With Quote
Old 06-26-2022, 02:19 PM   #2
Senior Member
 
Join Date: Jan 2017
Location: Manchester Center
Posts: 1,432
Probably a little late but the controller is either located under the bed in a walled off section or under the bedroom cabinets. If you are truly in need you can remove the screws holding the motors in and lift the motors up. This allows you to push the slide in. You will then need to put blocking in place to keep the slide in. The screws are located on the top of the h channel on the outside of the slide. Near the top gear track. Google Swintec slide motor removal.

Do you hear any motor sound at all? That can help determine the issue.
__________________
Paul and Debbie
2018 37TS
Jeep JL
RVermont is offline   Reply With Quote
Old 06-26-2022, 08:04 PM   #3
Member
 
Jmorenz's Avatar
 
Join Date: Dec 2021
Location: Linthicum
Posts: 98
Quote:
Originally Posted by horsegoalie View Post
Hi all,
Was supposed to be checking out of the campground this AM but our schwintek slide is stuck on our 37K bedroom slide.

We tried the retiming trick of run out, hold for 5s, run in, then repeat, but it didn’t help.

We are looking for the schwintek controller so that we can manually put in the slide. Does anyone know where it is? I have searched all over.

Thanks in advance!
Make sure the bed is completely upright. Slide had a cut off switch I am told. Bed had to be all the way up….
__________________
2022 Entegra Accolade 37K
From 2017 Monaco Dynasty
From 2005 Monaco Diplomat (Second best rv!)
From 2001 Daemon Escaper
From 1998 Daemon Intruder
From 1993 Daemon Hornet
From Tent (BEST RV EVER!)
Jmorenz is offline   Reply With Quote
Old 07-01-2022, 04:30 PM   #4
Junior Member
 
Join Date: Jul 2022
Location: Anderson
Posts: 1
On my 37K its under the bed at the foot level. Mine is electronic and has no manual way to put slide in. On the control it tells how to over ride the system by pressing the buttons so six times. You will have to remove a piece of plywood to get to the controller. My sliders has had the motors replaced and I still have the issue. after working on it it appears to work correctly, several days later it will not work repairman on his third try. Good luck
Sid Styers is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.