Slideout

[gymracer]

Have a Seneca 35GS super C. Went to slide in driver side large slide an it's dragging on the side wall. Had to jack it up from bottom to get it to go without catching and lacking 2" going all way in. I did finally got it and have the travel jacks on it. Looks like that side is low, just have not saw why. Thanks for any help.

[Marcm157]

Can you post some pictures?

[Grumpy]

You need to check the guide rollers in the basement. Sounds like one may have come loose and let the slide drop.

Here's the info from the web:

https://www.liveworkdream.com/wp-con...viceManual.pdf

[gymracer]

Ok, thought I looked at them all and seemed to be ok, but sure I miss something. Was trying to get left to go race in Indy and the thing was hanging and lacked about 1 1/2" going all the way in at the rear top. I know it has dropped down on that side letting it hit at the top. When I get home will dig into it. Thanks for the help.

[gymracer]

Actually there is not much to see. The slide is hitting at the top and not letting it go in all the way. It's hitting because that side is low causing it to bind on that side. Thanks