regulator help

[BB HUMMINGBIRD]

can i replace dual recalled regulator with single regulator? if so any suggestions? Happy Holidays and Warm Campfires thanks

[norty1]

I would use a 2 stage regulator to keep the pressure constant if you are using several propane appliances at the same time.
The single may work but could cause problems.

[Cincinnati Kid]

Yes. As Norty said, you still want a 2 STAGE regulator, but it can be a single tank regulator. Think about how you will mount the single regulator- vertical or horizontal- then order the appropriate one. You will just need to switch tanks by hand as they run out.

[Jagiven]

Most important is the the color of the connector. You will want the light green connector. This will allow enough BTUs to flow so you can run all your gas appliances at the same time.

"There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per hour. The dark green are rated for 450,000-500,000 Btu per hour. The Red connector is the strongest spring and is often used for high pressure adapters and T-fittings." per etrailer https://www.etrailer.com/question-331973.html