I am considering upgrading my 267 bh trailer suspension.
Looking for opinions/ comments from others who have upgrade their trailers.
From what I have read so far it seems most are upgrading to Moryde CRE 3000 with a wet bolt kit. Not seeing many comments on the Equa-flex. Has anyone Installed the Equa-flex?
Did this upgrade improve your towing experience?
I would appreciate any input.
Just got done installing the Mor Ryde wet bolts with the CRE3000, though. As far as improving the towing experience, I can't claim I notice a difference on our 2017, 26BH with around 8,000 miles on it. I could pretend it's a little smoother, but who knows? I was mainly concerned with the nylon bushing wearing out. Only one was worn all the way through. The others were getting iffy.
Thinking about getting the Morryde 4000. I have the 3000, but the 4000 supposedly raises the trailer 1.5", which would help it ride level, plus I like the stabilization bracket that comes with it.
__________________ Ford F250 6.2 Gas, 4X4, Short Bed, Companion Hitch
2019 Jayco 28.5 RSTS, MorRyde orbital pinbox.
If you have a spread axle moryde doesn’t make one, equa-flex does, which is what I have. I can’t tell a lot of difference in towing, may be a little smoother , the wet bolt kit is good, nothing can replace the torque flex axles of my last trailer
If you have a spread axle moryde doesn’t make one, equa-flex does, which is what I have. I can’t tell a lot of difference in towing, may be a little smoother , the wet bolt kit is good, nothing can replace the torque flex axles of my last trailer
That information is incorrect I just installed a MorRYDE for my widetrack
you need to call them direct to purchase .Pm me for the contact info
Ford F250 6.2 Gas, 4X4, Short Bed, Companion Hitch
Linear Mode
