|
|
03-23-2014, 12:25 PM
|
#441
|
Junior Member
Join Date: Mar 2014
Location: Huntington, CT
Posts: 5
|
We put these lights on our former camper and loved them (clean looking and nothing extra to have to put-up/take-down or store); however, we found at the end of about 2 seasons some of the lights went out. Not a big problem because we found the full length of our awning to provide too much light. With some of them blowing out wasn't a bad thing but eventually you have to start over.
|
|
|
03-23-2014, 05:34 PM
|
#442
|
Senior Member
Join Date: Jul 2012
Location: Greenville SC
Posts: 843
|
For the price, replacing every 2, is still a great deal. I ordered a package of those lil connectors as well. They seem to bend and break pretty easily.
|
|
|
03-23-2014, 09:28 PM
|
#443
|
Junior Member
Join Date: Feb 2014
Location: Alabama
Posts: 10
|
After all the good reviews, I order us a set of these lights! Can't wait until we get to try them out!
|
|
|
04-07-2014, 08:03 PM
|
#444
|
Member
Join Date: Sep 2012
Location: NW Ohio
Posts: 38
|
I'm happy to see that this thread is still alive and kickin'! Our lights have survived very well over the winter. Ours are on the roller tube, and never had a problem with them coming off. The connector part stayed nice and dry all season in a ziploc bag and twisty-tied. We did have a few of the lights that didn't work by the end of last season, but you couldn't tell it standing away from the camper. I ordered another cheap set over the winter just to have an extra. We had TONS of compliments at all of the campgrounds - the kiddos love them. The only problem is that these are becoming sooo popular, I'm afraid that we won't be special anymore!
__________________
RV there yet?
2018 Northpoint 377RLBH
2017 Dodge Ram Dually, Cummins Diesel
Gone but not forgotten:
2010 Designer 35RLTS and
2002 Dodge Ram Dually, Cummins Diesel
|
|
|
04-09-2014, 09:47 AM
|
#445
|
Member
Join Date: Apr 2014
Location: Mooresville
Posts: 34
|
I just ordered these for my Jayco 23B. I will let you know how it goes.
|
|
|
04-13-2014, 05:34 AM
|
#446
|
Junior Member
Join Date: Nov 2013
Posts: 19
|
How does it look?
Thanks for the idea. We love the lights so far.
__________________
Hines57
2014 267BHS JayFlight Swift
2014 Ram 2500 4X4 6.4
|
|
|
04-13-2014, 08:05 AM
|
#447
|
Senior Member
Join Date: Jan 2014
Location: Los Lunas, New Mexico
Posts: 3,766
|
Wow...thanks for all the pics. Those lites are sweet. My 24FBS has the factory installed white only LED lites. I thought that was great until I saw your pics on this thread. Can't change what I have but how do I install a dimmer on my existing lites? What kind do I get and where...Amazon? Thanks for your help.
__________________
2018 Eagle HT 26.5 RLDS. SOLD
2009 F150 Supercab UNICORN, 5.4L ,3.73, HD and Max Tow Packages, Timbrens, Bilstein shocks.
Wet bolt kit. Andersen Ultimate 20K hitch. TST 507RV TPMS. Hydro Life HL-200. 16" Goodyear Endurance. Progressive EMS. SteadyFast Stabilizers. Furion backup camera.
Best friend wife, Di, and dog Cooper. RETIRED
|
|
|
04-13-2014, 09:24 PM
|
#448
|
Junior Member
Join Date: Feb 2014
Location: Alabama
Posts: 10
|
Put mine up yesterday. Husband didn't like that it was shorter than what we need it to be. But my 4 yo likes to change the color of the lights.
|
|
|
04-14-2014, 05:11 PM
|
#449
|
Senior Member
Join Date: Jun 2012
Location: Southern Indiana
Posts: 1,326
|
Quote:
Originally Posted by hudsmom
Put mine up yesterday. Husband didn't like that it was shorter than what we need it to be. But my 4 yo likes to change the color of the lights.
|
Yeah... You gotta get that disco thang goin'!!!!
__________________
2017 Some Other Brand (SOB)
2013 Jayco Jay Feather X23B (She Gone)
2014 Ford Expedition
Gerard
|
|
|
04-14-2014, 08:27 PM
|
#450
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,217
|
I have the same light strip (white) and I just received my dimmer from China today. Dw won't let me put it in just yet, just as well, it needs some modification before I can use it. I'll try to get some pics and links up when I get around to putting it in.
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
04-17-2014, 02:32 PM
|
#451
|
Junior Member
Join Date: Mar 2014
Location: Coopersville
Posts: 15
|
Haven't put mine up yet, still trying to figure out where to install them, leaning toward on the awning tube.
|
|
|
04-19-2014, 03:24 PM
|
#452
|
Senior Member
Join Date: Sep 2013
Location: South Texas
Posts: 7,217
|
Quote:
Originally Posted by Mikeyonline
Haven't put mine up yet, still trying to figure out where to install them, leaning toward on the awning tube.
|
Careful, then you won't be able to use it with the awning closed. Mine is my only porch light, so I need to be able to use it with awning in...
__________________
-2018 Greyhawk 29MV
-2020 Jeep Wrangler Unlimited (JLU) (Primary Toad)
-1994 Jeep Wrangler YJ (Secondary Toad)
-2014 Jay Flight 28BHBE & Ram 2500 6.4L CC 4x4 (sold)
|
|
|
04-19-2014, 05:08 PM
|
#453
|
Junior Member
Join Date: Mar 2014
Location: Coopersville
Posts: 15
|
Ended up putting it on the trailer. Now it just needs to be dark to check them out
|
|
|
04-20-2014, 06:04 AM
|
#454
|
Senior Member
Join Date: Mar 2013
Location: Benson, NC
Posts: 170
|
For those that have a manual awning and installed the lights on the camper instead of the awning tube... how are you running the wires? I am pretty nervous about drilling holes in the side of the camper.
__________________
2012 Jayco Jay Flight 267BHS - Equal-i-zer WDH
2012 Dodge Ram 2500 Crew Cab 4x4 CTD
Me (Greg), DW & DDx2
|
|
|
04-21-2014, 12:16 PM
|
#455
|
Junior Member
Join Date: Mar 2014
Location: Coopersville
Posts: 15
|
well we installed it on the camper and like everyone else here the 3m tape that came installed on the lights failed. Went out at night to take a look at them and the lights were just hanging there.
As for the wires, I'm just going to run an extension cord up to the power adapter and either velcro the power adapter to the awning arm and place it on top of the camper, haven't figure that out yet.
|
|
|
04-28-2014, 09:55 PM
|
#456
|
Senior Member
Join Date: Jun 2012
Location: Southern Indiana
Posts: 1,326
|
Well we took the X23B out this week-end, for the first time this year, and I'm sad to say the awning lights I bought a year ago no longer work. I replaced the remotes' battery, but no go. Even the DW was disappointed!
Oh well, just got on amazon and ordered another set!
__________________
2017 Some Other Brand (SOB)
2013 Jayco Jay Feather X23B (She Gone)
2014 Ford Expedition
Gerard
|
|
|
04-28-2014, 10:10 PM
|
#457
|
Senior Member
Join Date: Apr 2014
Location: pottsgrove
Posts: 194
|
glsimms - thats disappointing to hear. I am putting a set of lights on now. I plan on putting blue under the awning and white on the awning tube. I am still looking at where to tap into the camper but it will probably be back at the end near the gutter. That area goes right into where the bunk lighting is. For the white lights on the awning, I'm leaving a connector that can be powered once I set up and removed for when the awning is rolled up. Do you know what failed on your lights?
__________________
2013 23B
2001 Tahoe
Sold 2005 Fleetwood Allegiance
Sold 1999 Durango
|
|
|
04-29-2014, 07:45 AM
|
#458
|
Senior Member
Join Date: Jun 2012
Location: Southern Indiana
Posts: 1,326
|
Quote:
Originally Posted by fmichaels
glsimms - thats disappointing to hear. I am putting a set of lights on now. I plan on putting blue under the awning and white on the awning tube. I am still looking at where to tap into the camper but it will probably be back at the end near the gutter. That area goes right into where the bunk lighting is. For the white lights on the awning, I'm leaving a connector that can be powered once I set up and removed for when the awning is rolled up. Do you know what failed on your lights?
|
I think it was the end connectors on the light strip looked like it had some corrosion on them, even though these were supposed to be "waterproof"......
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1
__________________
2017 Some Other Brand (SOB)
2013 Jayco Jay Feather X23B (She Gone)
2014 Ford Expedition
Gerard
|
|
|
05-12-2014, 07:23 AM
|
#459
|
Junior Member
Join Date: Mar 2014
Location: Coopersville
Posts: 15
|
Broke in the trailer this weekend and installed the lights while we were at the campground (go to love the raining season in MI). Lights are awesome.
|
|
|
05-12-2014, 07:56 AM
|
#460
|
Senior Member
Join Date: Mar 2013
Location: Benson, NC
Posts: 170
|
Quote:
Originally Posted by Mikeyonline
Broke in the trailer this weekend and installed the lights while we were at the campground (go to love the raining season in MI). Lights are awesome.
|
Looks good Mikey!!! I am thinking of doing the same thing... How did you run the power and signal wire?
__________________
2012 Jayco Jay Flight 267BHS - Equal-i-zer WDH
2012 Dodge Ram 2500 Crew Cab 4x4 CTD
Me (Greg), DW & DDx2
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|