|
|
06-02-2019, 11:40 PM
|
#21
|
Junior Member
Join Date: Apr 2019
Location: St. George
Posts: 1
|
For anyone who might be interested, I completed this modification on my 2008 EXP 213. I feel it was a success and am pleased with the results.
I had been looking for lift for my trailer for quite some time. And when I came across this I just could not resist.
I was able to get a buddy of mine who works at a large production fabrication shop to make me a set of the brackets Sicario posted. I was able to send them and use the dxf file. My buddy said he would try to use scrap from another project. I had to pay for time on the machine and my buddy’s normal hourly rate. In the end I paid 140$
The surface of the brackets were not finished in anyway, so I wire brushed and painted them with krylon anti rust automotive black spray paint I got from O Riley’s.
I have a paved side yard that is specific for trailer parking so I just did the project right there. This did cause some pain because I only have about 2 maybe 3 feet on each side of the trailer. This is because the trailer is parked in between my house and the block wall that marks my property.
I started by lifting the trailer with my bottle jack. I choose the spot directly near a cross member lifting it enough to slide a jack stand under and get the tire off. I used 2 jack stands one on either side of the wheels. I also used my normal leveling scissor jacks on each corner just for stability.
After getting the wheels off I started cracking off the existing bolts. I used a 24 inch breaker bar with a 19 mm socket and some variety of extensions. I also used a normal 3/4 socket for the back side bolts. I found the bolt behind the (knuckle??) the hardest and required either a short socket or a crescent wrench.
Once all but a single one the bolts were removed, I put my jack under the axle close to the frame and lifted slightly and removed the last bolt. Then I lowered the jack and with some assistance the axle dropped. I added the bracket and added the top bolts first. Then added the bottom bolts. Once they were all sung I attempted the drilling.
One of the sides can be drilled from the front. This worked well for 2 of 4 brackets. However the other 2 had alignment issues.
The other hole needed to drill is more difficult, again because of the (knuckle?? I really am guessing). Since the “thingy” is in the way it has to be drilled from the under side of the trailer. Only a pain because of limited space and strength to accurately drill the holes. I also had alignment issues this direction.
After completing the drilling I wiggled and re adjusted the brackets until the bolts all fit nice. I then tightened each bolt using the same breaker bar sockets and wrench listed above.
I was able to find the 1/2 inch - 2 inch long grade 8 bolts at Cal Ranch. The bolts behind the knuckle were 1.5 inch. Even better they are sold by the pound. All 24 bolts, 48 washers and 24 nuts cost me less than 20 bucks.
I found that I had to lift the trailer quite a bit in order to get the wheels back on. ( ya, I know kinda the result of a lift). This was only concerning because I felt like I needed to raise the one side I had completed to a point where I felt uncomfortable with the tilt. I was most likely paranoid because I know I have had it tilted more while out and about driving, but for what ever reason it freaked me out to much. I lifted the not completed side slightly before I fully lifted the completed side enough to get the wheel back on. This was to even out more the weight and correct the tilt.
After I lifted it more I was able to get the wheels on. Then rinse and repeat. The one bolts are a pain to remove with limited space, the drilling sucks, the bolts get tightened, and lastly the wheels back on.
After I got the brackets on and everything put back together I dropped/removed all the jacks and hitched it up to the truck.
Tows great. No issues so far going just to the pilot gas station and back.
Planning to take it out on a trip this weekend. Should be about 300 miles round trip. I will post an update after.
I also have not installed a bar to connect the brackets together. However, I do plan to install it on both sides eventually.
|
|
|
10-24-2019, 04:18 PM
|
#22
|
Senior Member
Join Date: Oct 2018
Location: Oakley
Posts: 156
|
This is fantastic. I had actually drawn up my own mounting plates in solidworks but I like yours a lot more. And I know they work since a few people have tried them.
I have not had any issues with my X213 hitting the ground, but its very low and I do a lot of dispersed camping on less than ideal dirt roads. I've been waiting for the day I tear something off.
Thanks for sharing.
__________________
Trailer: 2012 JayFeather X213
TV: 2014 F150 Ecoboost - Lariat, 4x4, Screw, 6.5' Bed, Max Tow Package
2nd TV: 2011 Lexus GX460
|
|
|
10-27-2019, 02:02 PM
|
#23
|
Senior Member
Join Date: Sep 2016
Location: Burleson
Posts: 537
|
Quote:
Originally Posted by mass-hole
This is fantastic. I had actually drawn up my own mounting plates in solidworks but I like yours a lot more. And I know they work since a few people have tried them.
I have not had any issues with my X213 hitting the ground, but its very low and I do a lot of dispersed camping on less than ideal dirt roads. I've been waiting for the day I tear something off.
Thanks for sharing.
|
I was going to point you here from the F150 forum, glad you found it!!!
|
|
|
09-27-2020, 05:17 AM
|
#24
|
Junior Member
Join Date: Sep 2020
Location: Harriman
Posts: 1
|
Lifting brackets
Just wanted to say thanks for all this information
|
|
|
01-10-2021, 10:35 PM
|
#25
|
Junior Member
Join Date: Jan 2021
Location: Nashvegas
Posts: 3
|
I don’t even own a Jayco but I have the Norco/BAL frame. I really appreciate the info and ingenuity all this time later.
|
|
|
02-27-2021, 10:30 AM
|
#26
|
Junior Member
Join Date: Jan 2021
Location: Nashvegas
Posts: 3
|
Anyone installed crossbar?
Has anyone installed the crossbar between the two tabs on the lift brackets? Any photos?
|
|
|
03-11-2021, 05:23 PM
|
#27
|
Junior Member
Join Date: Mar 2021
Location: Lafollite
Posts: 1
|
We are having trouble opening up the file. After we opened it up the only thing we saw was a drawing of the plate. Any help would be greatly appreciated.
|
|
|
03-11-2021, 05:32 PM
|
#28
|
Junior Member
Join Date: Jan 2021
Location: Nashvegas
Posts: 3
|
Quote:
Originally Posted by Tommy’s
We are having trouble opening up the file. After we opened it up the only thing we saw was a drawing of the plate. Any help would be greatly appreciated.
|
If you don’t have software to read the dxf file, it will likely look blank. My metal guy was able to read it and put it in a usable form for his CNC.
|
|
|
03-15-2022, 08:52 PM
|
#29
|
Junior Member
Join Date: Mar 2022
Location: Colorado springs
Posts: 2
|
Thanks so much for posting those designs. My 2000 cub thor is a single axle similar setup, think this exact design will work? I need then check my specific measurements between holes and compare. If needed, how would I be able to get those mods to a dfx design, is this something I can learn on my own or would a shop be able to adjust? Attaching pics of mine.
|
|
|
05-21-2022, 11:19 PM
|
#30
|
Junior Member
Join Date: Feb 2019
Location: Chattanooga
Posts: 1
|
Hi, can I please get the dfx file for this.
Neilatlanta@gmail.com
|
|
|
05-25-2022, 07:57 AM
|
#31
|
Senior Member
Join Date: Sep 2016
Location: Burleson
Posts: 537
|
Quote:
Originally Posted by Rambo2
Thanks so much for posting those designs. My 2000 cub thor is a single axle similar setup, think this exact design will work?
|
The do look like the same axle but as stated a few small measurements would confirm it.
|
|
|
05-25-2022, 07:58 AM
|
#32
|
Senior Member
Join Date: Sep 2016
Location: Burleson
Posts: 537
|
Quote:
Originally Posted by Neilatlanta
|
They are in post #9 on page 1.
|
|
|
06-10-2022, 10:41 PM
|
#33
|
Junior Member
Join Date: May 2022
Location: Boulder
Posts: 1
|
Distance from the edge of your Norco brackets were your 'middle' holes?
SICARIO,
Thanks so much for your design. I have a question. After drilling the 'middle' pair of holes through your bracket through the Norco axle bracket how close to the edge of the Norco brackets are the holes? I've done some measurements on my Dexter + Norco brackets and it seems the 5/8" drilled hole through the Norco brackets would be over the edge of the Norco bracket. What was the distance from the edge of your Norco brackets were your 'middle' holes?
|
|
|
09-16-2022, 07:22 PM
|
#34
|
Junior Member
Join Date: Sep 2022
Location: Memphis
Posts: 1
|
Now that you all have used this for a while has it worked out well? Also dis you have to drill the holes from under the trailer or could you get to both of them from the outside, it looks close to the hub on the hub side. Packyp
|
|
|
09-20-2022, 02:36 PM
|
#35
|
Senior Member
Join Date: Sep 2016
Location: Burleson
Posts: 537
|
Disregard...
|
|
|
08-10-2023, 10:31 AM
|
#36
|
Junior Member
Join Date: Aug 2023
Location: Lafayette
Posts: 2
|
Norco brackets lift..
Hi SICARIO,
How can I get a copy of the dwg of those brackets to lift my trailer? I tried downloading the zip files below, but they don’t pull up.. those look like they are a great solution. I have a buddy w a shop who can pop out 2 of those, but since you have a dwg, why reinvent the wheel?
Thanks,
Marc.. Teleboy.
|
|
|
08-10-2023, 10:44 AM
|
#37
|
Senior Member
Join Date: Sep 2016
Location: Burleson
Posts: 537
|
Quote:
Originally Posted by Teleboy
How can I get a copy of the dwg of those brackets to lift my trailer?
Marc.. Teleboy.
|
He hasn't been around in a few months but if you want to PM me your email address I'll send you the DFX and PDF files that he posted. I copied them a while back and kept them.
|
|
|
08-10-2023, 11:07 AM
|
#38
|
Junior Member
Join Date: Aug 2023
Location: Lafayette
Posts: 2
|
Found the PDF version. Thx!
Teleboy
|
|
|
08-10-2023, 11:11 AM
|
#39
|
Member
Join Date: Apr 2017
Location: Oregon City
Posts: 49
|
Sorry I missed this. Glad you found the PDF. Currently working on a lift design for my keystone passport.
|
|
|
08-11-2023, 07:45 AM
|
#40
|
Junior Member
Join Date: Nov 2018
Location: Lake Geneva
Posts: 4
|
Lift bracket zip
Teleboy,
It takes a special program to open that file. I would use that zip file because that's the file to load into the machine that will do the cutting.
I had 4 brackets made for my 2005 29Y. It worked perfectly! Makes a huge difference for clearance pulling in and out of gas stations, and gives enough height for hooking into sewers.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|