Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
Jayco RV Owners Forum
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-16-2021, 06:39 PM   #1
Junior Member
 
Yukonman's Avatar
 
Join Date: Jul 2017
Location: Whitehorse
Posts: 18
X213 furnace removal

My furnace is not working.

I have read most of the general guides for how to get it working.

I replaced thermostat

Blower doesn't turn on, not sounds of furnace running.

My question is specifically for the x213, any tips on removing furnace, there is no outside access and I feel like I might have to take a wall out.

Any suggestions?

2017 x213
Yukonman is offline   Reply With Quote
Old 07-17-2021, 05:48 AM   #2
Senior Member
 
Join Date: Aug 2020
Location: Daytona Beach
Posts: 465
If it sits under the stove, remove stove to gain access.
Just spit Allina.
PaulB12
PaulB12 is offline   Reply With Quote
Old 07-17-2021, 09:24 AM   #3
Junior Member
 
Yukonman's Avatar
 
Join Date: Jul 2017
Location: Whitehorse
Posts: 18
It's under the fridge for sure
__________________
The Yukonman,
2017 Jayco x213
2015 GMC Sierra 1500
Yukonman is offline   Reply With Quote
Old 07-17-2021, 11:55 AM   #4
Senior Member
 
Join Date: Aug 2020
Location: Daytona Beach
Posts: 465
If it doesn't pull out, the the fridge has to come out to access.
PaulB12
PaulB12 is offline   Reply With Quote
Old 07-17-2021, 11:57 AM   #5
Junior Member
 
Yukonman's Avatar
 
Join Date: Jul 2017
Location: Whitehorse
Posts: 18
Oh fridge out. Good point.

That sounds like a manageable job
__________________
The Yukonman,
2017 Jayco x213
2015 GMC Sierra 1500
Yukonman is offline   Reply With Quote
Old 07-17-2021, 12:28 PM   #6
Senior Member
 
Join Date: Aug 2020
Location: Daytona Beach
Posts: 465
If you don't boondocks, a cheap out would be a ceramic heater, should be all you need.
PaulB12
PaulB12 is offline   Reply With Quote
Old 07-20-2021, 08:37 PM   #7
Junior Member
 
Join Date: Jan 2018
Location: Winnipeg
Posts: 22
If it similar to the 2013. Itís only a few screws at the front holding it. Itís held tight at the exhaust port, slip fit. I had to yank mine out last year and replaced the combustion chamber. It needed to be completely stripped, replace the chamber and then re-assembled. Take a photo of the wiring before you start pulling them off.
LeMoeCND is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Jayco, Inc. or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 12:54 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright 2002-2016 Social Knowledge, LLC All Rights Reserved.