Tv bracket

[viennafire21]

On my new jayco it came with a TV bracket for inside and out. Does anyone know what TV will fit or what TV anyone else use.

[rockies_view]

Based on the manual (267BHSW) supports 32", check for your model. Just one warning, on our way back from camp, I found the TV on the floor! I bought a more solid mount that I need to install yet. Any recommendation on installing a mount on the entertainment area?
Thanks.

[2021JayFlight28BHS]

I just bought a 28bhs and have the same mount, it’s made to be used with a kebloc mount like on the outside of trailer. They didn’t add one to my bedroom, but A quick google search and $20 later I have one on the way. The mount in your pic will prob mount up to most TVs.

[viennafire21]

I am having a hard time finding a tv that bolts to the bracket. Hopefully can find a 24"

[kayakterp]

Which RV do you have?
My salesman looked up my 2016 27BHS and told me it will hold up to a 39"
I bought a 32" tele and have room to spare.
I bought the bracket & TV at Walmart and the dealer installed them before I took delivery.
So far no problems with it falling off or anything else

[viennafire21]

I have a 224bh, looking to get between a 24" and 32" the bracket is already on the wall inside and out. Just the TV bracket side is big.

[BanjoBob]

A Roku 32" will fit it as well as a Hisense 32" Roku TV. The Hisense does NOT work with the articulating mount due to the placement of the electrical cord on the back. That's the one thing I would check for sure before buying. Most 24" or 32" TV's should fit it. You will likely have to buy the bolts to mount it to the TV, they don't usually come with them. The manual will tell you what size and Home Depot or the like should have them.

[viennafire21]

Originally Posted by BanjoBob

A Roku 32" will fit it as well as a Hisense 32" Roku TV. The Hisense does NOT work with the articulating mount due to the placement of the electrical cord on the back. That's the one thing I would check for sure before buying. Most 24" or 32" TV's should fit it. You will likely have to buy the bolts to mount it to the TV, they don't usually come with them. The manual will tell you what size and Home Depot or the like should have them.

I was able to get my tcl roku tv to work, just had to add new holes since the original holes had the tv hitting the ceiling.

[BevSimon]

We have a 2021 White Hawk 29BH that we haven’t installed a bedroom tv in yet. We have a 32” Samsung and a bracket ready. We’re wondering if the mounting location sticker on the wall is accurate? There doesn’t seem to be a stud in the wall there. Thanks for your input.

[Jay2504]

Rockets view, we have the same mount system on our 2020 24RBS. Ours locks in to the wall puck. Could your tv fell off because it wasn’t locked in? Jay

[sbarlag]

Originally Posted by BevSimon

We have a 2021 White Hawk 29BH that we haven’t installed a bedroom tv in yet. We have a 32” Samsung and a bracket ready. We’re wondering if the mounting location sticker on the wall is accurate? There doesn’t seem to be a stud in the wall there. Thanks for your input.

Jayco installs a sizable plywood backer in the location of the wall sticker. You can use a stud finder to locate the edges. That's something Jayco does well, is putting plywood backers behind items such as running lights, and most everything mounted on top of the exterior aluminum siding.

[robd1438]

Curious what TV you guys are using; most 32" tv's I've looked at is a VESA 100x100 mount where this bracket is 200x200...

[2021JayFlight28BHS]

Originally Posted by robd1438

Curious what TV you guys are using; most 32" tv's I've looked at is a VESA 100x100 mount where this bracket is 200x200...

I bought an adjustable mount with vesa 100x100 and screwed it to the bracket that came with trailer. So now I have a 24” Tv that I had laying a round the house that I can pull out from the wall and put at an angle (side to side and up and down) so it can actually be watched from the bed.

This allows me to still use the kebloc tv mount and use tv outside.